Drill pipe & to..
Telephone:
0086-523-87991809
Mobile phone:
0086-13951157652
HYSK-630T pipe threading machine
This machine is for turning tool joint. It is the 45°slant bed machine. It has the features of high accuracy, high rigidity, big power etc. Use 8-station tool rest for outside thread cutting, dual immovable tool rests for inside thread cutting. Use central lubrication device, lubrication is sufficient and reliability. Lubrication cycle is auto controlled, and equipped with oil-way distributor and pressure sensor, it can fault alarm if any oil way being impassable. Use high power centrifuge cooling pump, assures the tool life. It is strict antiseep enclosed design, good watertightness.
|
Items |
Unit |
HYSK-630T |
|
Max. swing diameter over bed |
㎜ |
φ650 |
|
Max. swing diameter over saddle |
㎜ |
φ360 |
|
Hollow spindle hydraulic chuck diameter |
㎜ |
φ550 |
|
Spindle bore diameter |
㎜ |
φ200 |
|
Work piece length range |
㎜ |
750 |
|
Spindle speed range |
r/min |
50～450 |
|
Max. diameter of work piece |
㎜ |
630 |
|
Special thread diameter range |
in |
7～13 5/8 |
|
Steel grade range |
|
J55 K55 N80 L80 P110 nickel base alloy |
|
Max. travel of X-axis |
㎜ |
400 |
|
Max. travel of Z-axis |
㎜ |
800 |
|
X/Z servo motor |
Nm |
27/27 |
|
Rapid moving speed（X/Z） |
m/min |
8/10 |
|
Main motor power |
kW |
22～37 |
|
Spindle center height |
mm |
1100 |
|
Roughness |
mm |
Ra1.6 |
|
Machine weight |
㎏ |
8600 |
|
Machine dimension（L×W×H） |
mm |
5200*2100*2100 |